MSR165 Data Logger Vibration, Shock • Acceleration Sensor ±200 g • Stores over 1 bn Readings • LiPo-Battery 1000 mAh

Delivery time: 1-3 working days

MSR165 data logger for shocks, vibration, jolts · 3-axis-acceleration sensor ±200 g · stores over 1 bn measured values

Shock and vibration data logger with 3-axis-acceleration sensor ±200 g. Measuring rate up to 1600/s. Slot for microSD card. LiPo-battery 1000 mAh. 

Shock and vibration data logger MSR165B8A3 & N10006 with 3-axis-acceleration sensor ±200 g and microSD card for 1 billion measured values

Product features data logger MSR165B8A3 & N10006:

  • Shock and vibration data logger with built-in 3-axis-acceleration sensor ±200 g
  • Measuring rate up to 1600/s
  • Installed memory is capable of storing over 2 million measured values, with microSD card expandable to over 1 billion measured values
  • Measuring/storage rate adjustable between 25 Hz and 1600 Hz
  • Continuous data recording for vibration measurements
  • Recording time of up to 6 months
  • Lithium-polymer battery (1000 mAh), rechargeable via USB connection
  • MSR PC software and MSR ShockViewer analysis software for detailed analysis of the relevant shock events

Good to know:

With the data logger type 165B8A3 & N10006, shock monitoring up to ±200 g can be performed for up to half a year. In order to be able to store even large amounts of data, the data logger has a slot for a microSD card.

A measuring range of ±200 g is required if very large g-forces suddenly occur. This can be the case, for example, in transport monitoring, but also in aerospace applications or in drop and impact tests in industry. 

Large memory for large amounts of data

When measuring continuously at high measuring rates, this generates very large amounts of data, which can quickly exhaust conventional memory. The MSR165 type 165B8A3 & N10006 therefore has a slot for a microSD card, which increases the logger's storage capacity to over 1 billion measured values. This version of the MSR165 data logger is ideal for long-term recordings, not least thanks to its extremely low power consumption (LiPo battery 1000 mAh, rechargeable via USB)

MSR ShockViewer software for analysis

After recording, the shock and vibration data from your logger can be transferred to a computer via USB and evaluated. The scope of delivery of the MSR165 includes the MSR PC software for configuring and evaluating the data as well as the MSR ShockViewer evaluation software. With the MSR ShockViewer, extensive measurement data can be clearly displayed, shock events can be quickly analysed and conclusively documented. 

You need more advice? Contact us!

Housing: Anodised aluminium case, PC, encapsulated,
Size & Weight: 39 x 23 x 72 mm (W x H x L), approx. 69 g

Memory capacity:

Over 2 million measurement values, with microSD card over 1 billion.

Medium: Air
Colour: Blue, anthracite
Key: Set bookmark or start and stop recording.
Power supply:

Lithium polymer-battery (1000 mAh), rechargeable via
USB connection. Recording period up to 6 months.

Interface: USB
PC software:

MSR PC software, MSR ShockViewer

System requirements: Windows 7 or higher, USB port

Operating conditions:
Temperature: -20...+65 °C
Storage conditions:
+5 °C - +45 °C (ideal storage condition for the battery)
10...95 % relative humidity, non-condensing
Standards: The MSR165 complies with EU-Directives RoHS/WEEE.


Measured parameters Working range Accuracy Measurement/Storage rate
3-axis-acceleration ±200 g (-20...+65 °C)

±200 g sensor

±2 g (0...15 g, +25 °C)
±5 g (15...100 g, +25 °C)
±10 g (100...200 g, +25 °C)

up to 1600/s (±15 %)
Write Your Own Review
You're reviewing:MSR165 Data Logger Vibration, Shock • Acceleration Sensor ±200 g • Stores over 1 bn Readings • LiPo-Battery 1000 mAh
Your Rating
Copyright © 2018 MSR Electronics GmbH. All rights reserved.